Post by Admin on Jun 7, 2017 0:12:27 GMT
This vid helps Fix System Error E102 while trying to run or start your Xbox device.
First, please check to see if you can bring up the below Xbox Startup Troubleshooter.
To do so, do the following steps:
· Power off your console completely by removing power cord.
· Wait 30 seconds, and re-add the power cord manually.
· Press and hold the BIND button and the EJECT button, and press the Xbox button in the same time.
· Continue pressing the BIND and EJECT buttons for 10-15 seconds.
· If you hear two “power-up” tones, then you release the BIND and EJECT buttons after the second power-up tone.
· The console should power up and take you directly to the Xbox Startup Troubleshooter.
If Yes, get ready to restore your console to factory defaults:
1. Review the above steps to bring up the Xbox Startup Troubleshooter again.
2. Press the D-pad and A button on your controller.
3. You select "Reset this Xbox". When prompted, select "Remove everything".
If the error continues, restore your console to factory defaults.
Warning: Resetting your console to its factory defaults erases all accounts, saved games, settings, and home Xbox associations. Anything not synchronized with Xbox Live will be lost.
· Repeat the above steps to bring Xbox Startup Troubleshooter back.
· Press the D-pad and A button on your controller and select "Reset this Xbox". Refer to the below image.
If the above content fails to work for you, get your device repaired asap.
If you can't see said Troubleshoot page, read the below content.
1. Review the above content re how to Restore your console to factory defaults.
2. If the error continues, get your device repaired asap. And, to submit a repair request, visit Device Support@ devicesupport.microsoft.com/.
To do so, do the following steps:
· Power off your console completely by removing power cord.
· Wait 30 seconds, and re-add the power cord manually.
· Press and hold the BIND button and the EJECT button, and press the Xbox button in the same time.
· Continue pressing the BIND and EJECT buttons for 10-15 seconds.
· If you hear two “power-up” tones, then you release the BIND and EJECT buttons after the second power-up tone.
· The console should power up and take you directly to the Xbox Startup Troubleshooter.
If Yes, get ready to restore your console to factory defaults:
1. Review the above steps to bring up the Xbox Startup Troubleshooter again.
2. Press the D-pad and A button on your controller.
3. You select "Reset this Xbox". When prompted, select "Remove everything".
If the error continues, restore your console to factory defaults.
Warning: Resetting your console to its factory defaults erases all accounts, saved games, settings, and home Xbox associations. Anything not synchronized with Xbox Live will be lost.
· Repeat the above steps to bring Xbox Startup Troubleshooter back.
· Press the D-pad and A button on your controller and select "Reset this Xbox". Refer to the below image.
If the above content fails to work for you, get your device repaired asap.
If you can't see said Troubleshoot page, read the below content.
1. Review the above content re how to Restore your console to factory defaults.
2. If the error continues, get your device repaired asap. And, to submit a repair request, visit Device Support@ devicesupport.microsoft.com/.